PJT Green Plumbing are the leading water tank supply and installation providers in Melbourne and the surrounding area.
PJT Green Plumbing can supply and install all available water pumps on the Australian market for domestic and commercial requirements.
PJT Green Plumbing are available for all your all your tank and pump repairs, servicing and maintenance needs in Melbourne.
A rainwater tank can be a great addition to your property. The real trick, of course, is finding an option that’s truly right for you.
Buy a r tank that’s too small and it can run dry well before the next decent rain. Choose one that’s too big and you’ve paid for storage you’ll rarely fill. If you’re currently looking into rainwater tanks in Melbourne, it usually comes down to three things: the size of your roof, how much rain Melbourne actually gets and how much water your household uses.
This guide takes you through each step in plain terms, with a worked example you can adapt to your own home. We’ll also look at how the type of tank changes the answer, from slimline metal and underground tanks to rural rainwater tanks, and what a rainwater tank pump adds to the picture.
The short answer is you need a rainwater tank that covers your needs and intended use. A tank ranging from 2,000 litres to 5,000 litres can cover basic gardening needs, while a larger tank of 30,000+ litres would be needed for full family use indoors and out.
There are three steps to discover what size rainwater tank you need:
To work out the catchment area of your roof you need to measure the footprint of your roof from above, not the total surface area of your slanted roof. You measure this way because, generally, rainwater falls straight down. This means the horizontal footprint is what catches the water, irrelevant of the slope of your roof. A sloped roof has more surface area but it does not catch more rain than a flat roof.
How to Calculate Catchment Area
The general rule of thumb is 1 square metre of roof area that collects 1 millimetre of rain will give you 1 litre of water. So the next step is to figure out how much rain you receive.
Using the Bureau of Meteorology website, you can find the average rainfall by month, for your particular suburb or council area. For example, from their website, the annual rainfall for the Melbourne area is 648.3mm per year.
Using this figure, the rule of 1 millimetre of rain on 1 square metre of roof equals 1 litre of water:
If you had a 100-square metre roof footprint in Melbourne, you could realistically collect almost 65,000 litres of water per year. This assumes a perfect 100% conversion from rainfall to rainwater tank collection.
You can use a government website such as the Energy.gov.au to calculate the estimated water usage in your home.
A rough guide to typical household usage is as follows:
Factors that can move the needle on water usage.
Take a household of four, with 150 m² of roof connected to a tank that supplies the toilets and washing machine.
A 3,000 litre tank would cover about 18 days of toilet and laundry demand, and a 5,000 litre tank about a month. For this household, a tank in the 3,000 to 5,000 litre range is a sensible starting point, with the upper end giving more buffer between rainfall events. Watering the garden adds demand in the warmer, drier months.
These are study averages, so treat the result as a starting point. Your plumber can confirm the right size for your roof, downpipes, space and budget.
Information sourced from here
Narrow side passage? A slimline metal rainwater tank sits along the side of your house, shed or fence, so you get the storage without losing the yard. We install Melbourne-made Tankworks Australia steel tanks in Colorbond and painted finishes, up to 7,500 litres, or custom-made to fit your space. Tight access? The modular AquaClad system arrives packed flat.
If there’s no room for a tank above ground, or you’d rather not see one, underground rainwater tanks in Melbourne keep the water out of sight and your yard free. We supply and install them, from site inspection and excavation to connecting the pipework, overflow and rainwater tank pump. Load-rated options suit areas that will be driven over.
On a larger property, the roofs of your house and sheds can collect a lot of rain. Our rural rainwater tanks run from 27,000 to 320,000 litres in galvanised steel, with a 20-year pro rata manufacturer’s warranty. We assemble them on site on a concrete foundation. If the tank is also your drinking supply, it needs regular maintenance, treatment and testing, as the Victorian Government’s guidance explains.
You need a rainwater tank that holds a minimum of four weeks’ worth of your estimated water use, and about 95% of setups require a pump to deliver usable water pressure.
Sizing a tank comes down to three numbers: your roof’s catchment area, Melbourne’s rainfall and what your household will draw from the tank. For a typical Melbourne home, the Victorian Government’s guidance runs from about 2,000 litres for a small townhouse to about 5,000 litres for a medium 3 to 4 bedroom house.
Our worked example, a family of four with toilets and laundry connected, lands in the 3,000 to 5,000 litre range. Connecting those indoor uses keeps the tank in regular use all year, which leaves room for the next rain.
From there, the right rainwater tank for your Melbourne home depends on your site. A slimline metal tank suits a narrow gap, an underground rainwater tank keeps the yard clear, and rural rainwater tanks handle larger roofs and higher demand. A rainwater tank pump will usually be needed to deliver usable pressure to the house and garden.
If you’re looking on the lookout for water tanks in Melbourne or surrounding suburbs, PJT Green Plumbing is just the team to call. We’ve got an experienced team ready to assist with rainwater tank installation, water tank plumbing, stormwater solutions and sustainable plumbing services.
Want a second opinion on size, space or pump? Call PJT Green Plumbing on 1300 731 578 or send us an enquiry. We’ll assess your site and recommend a tank to suit your roof, space and budget.
As certified plumbers we also provide all manners of general and gas-fitting services around your home or business.
Paul Talbot is the Managing Director of PJT Green Plumbing, where he designs complete water harvesting solutions for domestic, commercial and Government water users and specialises in rainwater tanks, stormwater systems, roofing and gutters and water saving devices. A keen scuba diver, he saw first-hand the impact of stormwater outflow on the marine environment after heavy rain, which led him to refocus his plumbing business on green plumbing. He is also behind Clean Up Our Water, an organisation co-funded by PJT Green Plumbing that helps remove waste and pests along coastlines and waterways. The business is licensed for general plumbing and gas fitting and works from its warehouse in Coburg North, servicing all of Melbourne.